Specification & Features:
Emitter: one LED, cool white or neutral white , mounted on copper DTP MCPCB
Color temperature: cool white: 6000-6500K; natural white: 5700K
Flux: 4300 lumen
Range: 735 meters
Firmware: Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace
 By default the FT03 is set to use the very intuitive Narsil smooth RAMPING UI. Instant access to a TURBO mode is also provided.
 A more conventional discrete level MODE-SET UI is available as an alternative. Any one of 12 pre- defined mode-sets can be selected.
 MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets.
Forbidden to use a broken skin or broken battery, which is easy to cause a short circuit.
It is recommended to use 26650 battery, the flashlight can be used to the best.
Battery: One 26650 cell (or a 21700/18650 cell) Cells are not included.
Driver: Texas Avenger FET Driver with charging
Reflector: High quality smooth reflector
Lens: Glass with anti-reflective coating
Body: Aluminum alloy with Type III hard-coat anodizing
Button: Silicone rubber
Ingress rating: Equivalent to IPX7, do not immerse in liquids
Impact resistance: Up to 1.5 meters
Weight: Approximately 295g without cells
Dimensions: 170mm*69.5mm*34.5 (length*head diameter*body diameter)
FT03 XHP50.2 and SST40 versions are both anduril ui, so the instructions are equipped with the same(SST40 version manual). Please refer to the XHP50.2 parameters of this page.
1 x Astrolux FT03
2 x Spare Waterproof O-rings
1 x 26650/18650 to 21700 battery adapter( the transparent tube)
1 x Lanyard
1 x User Manual